Articles

Alhabill, F. N., Ayoob, R., Andritsch, T. and Vaughan, A. S.et al (2017) Effect of Resin/Hardener Stoichiometry on Electrical Behavior of Epoxy Networks. IEEE Transactions on Dielectrics and Electrical Insulation, 24 (6). 3739 -3749. ISSN 1070-9878

Alhabill, F. N., Ayoob, R., Andritsch, T. and Vaughan, A. S.et al (2018) The Effect of Water Absorption on the Dielectric Properties of Polyethylene Hexagonal Boron Nitride Nanocomposites. Journal of Physics D: Applied Physics, 51 (6). 065307. ISSN 0022-3727

Alhabill, F. N., Ayoob, R., Andritsch, T. and Vaughan, A. S.et al (2017) Enhanced dielectric properties of polyethylene/hexagonal boron nitride nanocomposites. Journal of Materials Science, 53 (5). pp. 3427-3442. ISSN 0022-2461

Alhabill, F. N., Ayoob, R., Andritsch, T. and Vaughan, A. S.et al (2017) Influence of filler/matrix interactions on resin/hardener stoichiometry, molecular dynamics, and particle dispersion of silicon nitride/epoxy nanocomposites. Journal of Materials Science, 53 (6). pp. 4144-4158. ISSN 0022-2461

Alhabill, F. N., Bhabha, H., Harmer, S. W., Vaughan, A. S., Wang, Y. and Qiang, D.et al (2021) On the Dynamics of Moisture Absorption and Its Impact on Dielectric Properties of Epoxy Networks under DC and AC Voltages. IEEE Transactions on Dielectrics and Electrical Insulation, 28 (5). pp. 1677-1685. ISSN 1558-4135

Alhabill, F. N., Vaughan, A. S., Anani, N. and Andritsch, T.et al (2021) Effect of stoichiometry on AC and DC breakdown of silicon nitride/epoxy nanocomposites. IEEE Transactions on Dielectrics and Electrical Insulation, 28 (4). pp. 1231-1237. ISSN 1558-4135

Bamonte, G., Iodice, C. M., Mastropasqua, R., Van Dijk, E. H. C., Appeltans, A., Cicinelli, M. V., Menean, M., Ten Tusscher, M., Harmer, S. W., Marolo, P., Borrelli, E., Reibaldi, M., Panos, G. D. and Motta, L.et al (2024) Symptomatic vitreous opacities: exploring the mismatch between clinical observation of vitreous alterations and self-reported symptoms. Journal of Clinical Medicine, 13 (20). pp. 1-8. ISSN 2077-0383

Barakat, B., Keates, S., Wassell, I. J. and Arshad, K.et al (2019) Is the Zero-Wait Policy Always Optimum for Information Freshness (Peak Age) or Throughput? IEEE Communications Letters, 23 (6). pp. 987-990. ISSN 1089-7798

Barakat, B., Keates, S., Wassell, I. J. and Arshad, K.et al (2019) Modelling IoT devices communication employing representative operation modes to reveal traffic generation characteristics. International Journal of Parallel, Emergent and Distributed Systems. pp. 1-13. ISSN 1744-5760

Barakat, B., Taha, A., Samson, R., Steponenaite, A., Ansari, S., Langdon, P. M., Wassell, I. J., Abbasi, Q. H., Imran, M. A. and Keates, S.et al (2021) 6G Opportunities Arising from Internet of Things Use Cases: A Review Paper. Future Internet, 13 (6). e159. ISSN 1999-5903

Bhabha, H. and Henwood, N. G. (2013) Finite Element Analysis for the Analysis of Rotomoulded Parts. Affiliation of Rotational Moulding Organisations Annual Newsletter (20). p. 7.

Cardoso, M. A., Gonçalves, H. M. R. and Davis, F. (2023) Reactive oxygen species in biological media are they friend or foe? Major In vivo and In vitro sensing challenges. Talanta, 260. pp. 1-18. ISSN 1873-3573

Chansud, N., Kaewnok, R., Nurerk, P., Davis, F. and Bunkoed, O.et al (2023) Ultrasensitive and highly selective fluorescence probe of nitrogen-doped graphene quantum dots and zinc oxide decorated carbon foam incorporated molecularly imprinted polymer for trace sparfloxacin determination. Materials Today Communications, 35. p. 105687. ISSN 23524928

Danoune, M.B., Djafour, A., Wang, Y. and Gougui, A.et al (2021) The Whale Optimization Algorithm for efficient PEM fuel cells modeling. International Journal of Hydrogen Energy, 46 (75). pp. 37599-37611. ISSN 0360-3199

Das, R., Wang, Y., Busawon, K., Putrus, G. and Neaimeh, M.et al (2021) Real-time multi-objective optimisation for electric vehicle charging management. Journal of Cleaner Production, 292. ISSN 0959-6526

Das, R., Wang, Y., Putrus, G., Kotter, R., Marzband, M., Herteleer, B. and Warmerdam, J.et al (2020) Multi-Objective Techno-Economic-Environmental Optimisation of Electric Vehicle for Energy Services. Applied Energy, 257. pp. 1-18. ISSN 0306-2619

Derick, M., Rani, C., Rajesh, M., Farrag, M.E., Wang, Y. and Busawon, K.et al (2017) An improved optimization technique for estimation of solar photovoltaic parameters. Solar Energy, 157. pp. 116-124. ISSN 0038-092X

Dudeney, R., Newman, J. D., Davis, F., Setford, S. J. and Tothill, I. E.et al (2017) Microband Sensor for As(III) Analysis: Reduced Matrix Interference. Electroanalysis, 29 (10). pp. 2332-2339. ISSN 1040-0397

Harmer, S. W., Shylob, S., Sydorenkob, Y., Dundonaldc, D. and Wheelerc, D.et al (2014) Passive Millimetre-wave Imaging with a Planar Diffraction Antenna. IEEE Transactions on Computers. pp. 1095-1099. ISSN 0018-9340

Hromadka, J., Korposh, S., Partridge, M., James, S. W., Davis, F., Crump, D. and Tatam, R. P.et al (2017) Volatile Organic Compounds Sensing Using Optical Fibre Long Period Grating with Mesoporous Nano-Scale Coating. Sensors (Basel, Switzerland), 17 (2). pp. 1-16. ISSN 1424-8220

Keates, S. (2017) Measuring acceptable input: What is “good enough”? Universal Access in the Information Society, 16 (3). pp. 713-723. ISSN 1615-5289

Keates, S. (2020) When universal access is not quite universal enough: case studies and lessons to be learned. Universal Access in the Information Society, 19 (1). pp. 133-144. ISSN 1615-5289

Keates, S. (2015) A pedagogical example of teaching Universal Access. Universal Access in the Information Society, 14 (1). pp. 97-110. ISSN 1615-5289

Ma, X., Keates, S., Jiang, Y. and Kosinka, J.et al (2015) Subdivision surface fitting to a dense mesh using ridges and umbilics. Computer Aided Geometric Design, 32 (2015). pp. 5-21. ISSN 0167-8396

Ma, Y., See, C. H., Pang, F., Wu, D., Liu, D., Abidin, Z. Z., Keates, S., Peng, B. and Abd-Alhameed, R. A.et al (2020) A 10:1 Bandwidth Cryogenic Quadruple-Ridged Flared Horn Design for Reflector Antennas in Radio Astronomy. IEEE Access, 8. pp. 81101-81115. ISSN 2169-3536

Mathew, D., Rani, C., Kumar, M. R., Wang, Y., Binns, R. and Busawon, K.et al (2018) Wind Driven Optimization Technique for Estimation of Solar Photovoltaic Parameters. IEEE Journal of Photovoltaics, 8 (1). pp. 248-256. ISSN 2156-3381

Mathew, D., Chinnappa Naidu, R., Wang, Y. and Busawon, K.et al (2021) Single‐stage microinverter with current sensorless control for BIPV system. IET Renewable Power Generation, 15 (11). pp. 2468-2479. ISSN 1752-1416

Paladin, A., Das, R., Wang, Y., Ali, Z., Kotter, R., Putrus, G. and Turri, R.et al (2020) Micro market based optimisation framework for decentralised management of distributed flexibility assets. Renewable Energy, 163. pp. 1595-1611. ISSN 0960-1481

Qiang, D., Wang, Y., Alhabill, F. N., Chen, G. and Andritsch, T.et al (2020) Study on Quantification Method for Dispersion and Distribution of Sphere/-like Particles and Relationship with AC/DC Breakdown Strength in Polymer Nanocomposites. IEEE Transactions on Dielectrics and Electrical Insulation, 27 (2). pp. 343-351. ISSN 1070-9878

Raksawong, P., Nurerk, P., Chullasat, K., Kanatharana, P., Davis, F. and Bunkoed, O.et al (2017) A hybrid molecularly imprinted polymer coated quantum dots nanocomposite optosensor for highly sensitive and selective determination of salbutamol in animal feeds and meat samples. Analytical and Bioanalytical Chemistry, 409 (20). pp. 4697-4707. ISSN 1618-2650

Sun, J., Zhou, A., Keates, S. and Liao, S.et al (2018) Simultaneous Bayesian Clustering and Feature Selection Through Student’s t Mixtures Model. IEEE Transactions on Neural Networks and Learning Systems, 29 (4). pp. 1187-1199. ISSN 2162-237X

Wang, Y., Das, R., Putrus, G. and Kotter, R.et al (2020) Economic evaluation of photovoltaic and energy storage technologies for future domestic energy systems – A case study of the UK. Energy, 203. p. 117826. ISSN 0360-5442

Wang, Y. and Infield, D. (2018) Markov Chain Monte Carlo simulation of electric vehicle use for network integration studies. International Journal of Electrical Power and Energy Systems, 99. pp. 85-94. ISSN 0142-0615

Book Sections

Davis, F. and Altintas, Z. (2018) General introduction to biosensors and recognition receptors. In: Biosensors and Nanotechnology: Applications in Health Care Diagnostics. John Wiley & Sons, Inc, London, UK, pp. 1-15. ISBN 9781119065012

Davis, F. and Shimizu, F., M. (2017) Smart Nanomaterials: Applications in Biosensors and Diagnostics. In: Biosensors and Nanotechnology: Applications in Health Care Diagnostics. John Wiley & Sons, Inc., London, UK. ISBN 9781119065012

Javaheri Javid, M. A., Zimmer, R. and Majid al-Rifaie, M. (2014) Detecting Symmetry in Cellular Automata Generated Patterns Using Swarm Intelligence. In: Theory and Practice of Natural Computing. Lecture Notes in Computer Science (LNCS), 8890 . Springer International Publishing, Switzerland, pp. 83-94. ISBN 9783319137483

Lui, P., H., Cutler, V., Raghavan, C., Miles, P., Schubert, E. and Webers, N.et al (2018) Abrasive Technology - Characteristics and Applications. In: Advanced Abrasive Waterjet for Multimode Machining. IntechOpen, London, pp. 39-63. ISBN 9781789841930

Okafor, K. C., Adebisi, B., Akande, A. O. and Anoh, K.et al (2024) Revolutionizing retail logistics: Fine-tuning 5G-cyberphysical vehicular networks with AGSA-driven path loss models. In: 2023 2nd International Conference on Multidisciplinary Engineering and Applied Science (ICMEAS). IEEE, pp. 1-6. ISBN 9798350358834

Okafor, K. C., Adebisi, B. and Anoh, K. (2024) Memory-efficient spike-time-dependent plasticity for future driverless car park infrastructure. In: 2023 2nd International Conference on Multidisciplinary Engineering and Applied Science (ICMEAS). IEEE, pp. 1-5. ISBN 9798350358834

Conference or Workshop Items

Bhabha, H. (2014) Critical Factors Affecting the Use of Finite Element Analysis for Rotomolded Parts. In: Society of Plastics Engineers Annual Technical Conference (ANTEC) 2014, 28-30 April 2014, Rio Hotel. 3700 W Flamingo Rd, Las Vegas, NV 89103, United States.

Bhabha, H. (2013) Using Finite Element Analysis as a Design Tool for Rotamoulded Parts. In: BPF Rotational Moulders Group Tooling Seminar, 25th April 2013, MPH Training and Conference Centre, Gateshead, Newcastle, UK..

Cook, J., Cutler, V., Panneels, I. and Samiento, J.et al (2018) The Glass Path and the Visual Culture of Glass: What Does All This Glass “Do” in the World, Anyway. In: The Glass Path 47th Annual Conference, Glass Art Society, 16-19 May 2018, Murano, Italy.

Eze, E. O., Keates, S., Pedram, K., Esfahani, A. and Odih, U.et al (2022) An event-based Intelligent Vehicle Rerouting for Efficient Traffic Management for Connected Vehicles. In: 2022 5th International Conference on Information and Communications Technology (ICOIACT), 24 -25 August 2022, Yogyakarta, Indonesia (also online).

Liu, P.H.-T., Webers, N. and Cutler, V. (2018) Recent advancement in abrasive waterjet for precision multimode machining. In: 24th International Conference on Waterjetting, 5-7 September 2018, Manchester.

Patents

Radio Physics Solutions Ltd (2017) Remote detection and measurement of objects. .

Shows/Exhibitions

Cutler, V. (2014) Harmony- Dylan Thomas International Glass Prize 2014. [Shows/Exhibitions]

Cutler, V. (2019) NGC21. [Shows/Exhibitions]

Cutler, V. (2019) Return to Analogue. [Shows/Exhibitions]

Cutler, V. (2020) Silica Valley. [Shows/Exhibitions]