A

Alhabill, F. N., Bhabha, H., Harmer, S. W., Vaughan, A. S., Wang, Y. and Qiang, D.et al (2021) On the Dynamics of Moisture Absorption and Its Impact on Dielectric Properties of Epoxy Networks under DC and AC Voltages. IEEE Transactions on Dielectrics and Electrical Insulation, 28 (5). pp. 1677-1685. ISSN 1558-4135

Anoh, K., Vukobratovic, D., Morstyn, T., Bajovic, D. and Adebisi, B.et al (2023) Maximising power-network utility with delivery contracts in energy peer-to-peer trading. In: 2023 IEEE International Conference on Communications, Control, and Computing Technologies for Smart Grids (SmartGridComm), 31 October 2023 - 03 November 2023, Glasgow, United Kingdon.

Austin, K., Nichola, K. J., Jones, C. M. and Loosemore, M.et al (2023) Criterion validity and reliability of an instrumented mouthguard under pendulum impactor conditions. Sports Engineering, 26 (1). pp. 1-8. ISSN 1460-2687

B

Bhabha, H. (2014) Critical Factors Affecting the Use of Finite Element Analysis for Rotomolded Parts. In: Society of Plastics Engineers Annual Technical Conference (ANTEC) 2014, 28-30 April 2014, Rio Hotel. 3700 W Flamingo Rd, Las Vegas, NV 89103, United States.

Bhabha, H. (2013) Using Finite Element Analysis as a Design Tool for Rotamoulded Parts. In: BPF Rotational Moulders Group Tooling Seminar, 25th April 2013, MPH Training and Conference Centre, Gateshead, Newcastle, UK..

Radio Physics Solutions Ltd (2017) Remote detection and measurement of objects. .

Brown, G. and Edmunds, S. (2011) Doing pedagogical research in engineering. Engineering Centre for Excellence in Teaching and Learning, Loughborough University, Loughborough. ISBN 9780956509857

C

Chansud, N., Kaewnok, R., Nurerk, P., Davis, F. and Bunkoed, O.et al (2023) Ultrasensitive and highly selective fluorescence probe of nitrogen-doped graphene quantum dots and zinc oxide decorated carbon foam incorporated molecularly imprinted polymer for trace sparfloxacin determination. Materials Today Communications, 35. p. 105687. ISSN 23524928

Chukwuma, I. F., Okafor, K. C., Apeh, V. O., Nworah, F. N., Odo, C. P., Okafor, I. P., Anoh, K. and Anthony, O. C.et al (2024) Utilizing mechatronic agilent gas chromatography to validate therapeutic efficacy of combretum paniculatum against oxidative stress and inflammation. Heliyon, 10 (18). pp. 1-14. ISSN 2405-8440

Cutler, V. (2020) Silica Valley. [Shows/Exhibitions]

D

Dixon, A. M. and McManus, M. (2005) An introduction to life cycle and rebound effects in water systems. In: Water Demand Management. IWA publishing. ISBN 9781843390787

E

Eze, E. O., Keates, S., Pedram, K., Esfahani, A. and Odih, U.et al (2022) An event-based Intelligent Vehicle Rerouting for Efficient Traffic Management for Connected Vehicles. In: 2022 5th International Conference on Information and Communications Technology (ICOIACT), 24 -25 August 2022, Yogyakarta, Indonesia (also online).

G

Ghani, A., Hodeify, R., See, C. H., Keates, S., Lee, D.-J. and Bouridane, A.et al (2022) Computer Vision-Based Kidney’s (HK-2) Damaged Cells Classification with Reconfigurable Hardware Accelerator (FPGA). Electronics, 11 (24). pp. 1-17. ISSN 2079-9292

H

Higson, S. P. J., Tur-Garcia, E. L., Davis, F., Collyer, S. D., Holmes, J. L. and Barr, H.et al (2016) Novel Flexible Enzyme Laminate-Based Sensor for Analysis of Lactate in Sweat. Sensors and Actuators B: Chemical, 242. pp. 502-510. ISSN 0925-4005

K

Keates, S. (2020) When universal access is not quite universal enough: case studies and lessons to be learned. Universal Access in the Information Society, 19 (1). pp. 133-144. ISSN 1615-5289

L

Lipscomb, I. P., Weaver, P. M., Swingler, J. and McBride, J. W.et al (2009) Micro-computer tomography—An aid in the investigation of structural changes in lead zirconate titanate ceramics after temperature-humidity bias testing. Journal of Electroceramics, 23 (1). pp. 72-75. ISSN 1385-3449

Lipscomb, I. P., Weaver, P.M., Swingler, J. and McBride, J.W.et al (2009) The effect of relative humidity, temperature and electrical field on leakage currents in piezo-ceramic actuators under dc bias. Sensors and Actuators A: Physical, 151 (2). pp. 179-186. ISSN 09244247

Liu, P.H.-T., Webers, N. and Cutler, V. (2018) Recent advancement in abrasive waterjet for precision multimode machining. In: 24th International Conference on Waterjetting, 5-7 September 2018, Manchester.

Lui, P., H., Cutler, V., Raghavan, C., Miles, P., Schubert, E. and Webers, N.et al (2018) Abrasive Technology - Characteristics and Applications. In: Advanced Abrasive Waterjet for Multimode Machining. IntechOpen, London, pp. 39-63. ISBN 9781789841930

M

Ma, Y., See, C. H., Pang, F., Wu, D., Liu, D., Abidin, Z. Z., Keates, S., Peng, B. and Abd-Alhameed, R. A.et al (2020) A 10:1 Bandwidth Cryogenic Quadruple-Ridged Flared Horn Design for Reflector Antennas in Radio Astronomy. IEEE Access, 8. pp. 81101-81115. ISSN 2169-3536

Mercantili, L., Davis, F., Collyer, S. D. and Higson, S. P. J.et al (2014) Ultrasonic modification of the viscosity of vegetable, mineral and synthetic oils - effects of nucleating agents and free-radical scavengers. Lubrication Science, 27 (3). pp. 177-191. ISSN 0954-0075

O

Okafor, K. C., Adebisi, B., Akande, A. O. and Anoh, K.et al (2024) Revolutionizing retail logistics: Fine-tuning 5G-cyberphysical vehicular networks with AGSA-driven path loss models. In: 2023 2nd International Conference on Multidisciplinary Engineering and Applied Science (ICMEAS). IEEE, pp. 1-6. ISBN 9798350358834

Okafor, K. C., Adebisi, B. and Anoh, K. (2024) Memory-efficient spike-time-dependent plasticity for future driverless car park infrastructure. In: 2023 2nd International Conference on Multidisciplinary Engineering and Applied Science (ICMEAS). IEEE, pp. 1-5. ISBN 9798350358834

P

Paladin, A., Das, R., Wang, Y., Ali, Z., Kotter, R., Putrus, G. and Turri, R.et al (2020) Micro market based optimisation framework for decentralised management of distributed flexibility assets. Renewable Energy, 163. pp. 1595-1611. ISSN 0960-1481

Partridge, M., Davis, F., James, S., Higson, S. P. J. and Tatam, R.et al (2017) A solution to the slow stabilisation of surface pressure sensors based on the Wilhelmy method. Matters. pp. 1-7. ISSN 2297-8240

S

Smith, N. A., Dyson, R. J. and Janaway, L. (2004) Ground reaction force measures when running in soccer boots and soccer training shoes on a natural turf surface. Sports Engineering, 7 (3). pp. 159-167. ISSN 1369-7072

T

Tota-Maharaj, K. and Keates, S. (2024) Utilisation of solar energy driven photochemical processes for river water purification. West Indian Journal of Engineering, 47 (1). pp. 26-34. ISSN 0511-5728

V

Viitala, T., Nabok, A., Walch, N.J., Dutton, S., Davis, F. and Higson, S. P. J.et al (2017) Graphene-based LbL deposited films: further study of electrical and gas sensing properties. MATEC Web of Conferences, 98 (04001). pp. 1-4. ISSN 2261-236X

W

Walch, N. J., Nabok, A. V., Davis, F. and Higson, S. P. J.et al (2016) Characterisation of Thin Films of Graphene-surfactant Composites Produced via a Novel Semi-Automated Method. Beilstein Journal of Nanotechnology, 7. pp. 209-219. ISSN 2190-4286

Walch, N. J., Davis, F., Langford, N., Holmes, J. L., Collyer, S. D. and Higson, S. P. J.et al (2015) Enhancement of Electrode Performance by a Simple Casting Method Using Sonochemically Exfoliated Graphene. Analytical Chemistry, 87 (18). pp. 9273-9279. ISSN 1520-6882

Wang, Y., Das, R., Putrus, G. and Kotter, R.et al (2020) Economic evaluation of photovoltaic and energy storage technologies for future domestic energy systems – A case study of the UK. Energy, 203. p. 117826. ISSN 0360-5442